SAF ITALIA

Load Lifting and Anchoring Systems

LIFTING SYSTEMS - Slings

POLYESTER

Slot-to-slot belts to standard DIN B2N, "TOP" double layer

FLAT AND WOVEN BELTS, "TOP" DOUBLE LAYER
								COLOURS TO CEN STANDARDS SAFETY COEFFICIENT 7:1
Code	WLL (kg) carrying capacity with a TOP belt					WLL (kg) carrying capacity with two NB belts
Type of lifting	direct pulling	with loop	with basket, angle inclination ß			Angle inclination ß
	direct pulling	with loop	up to 7°	from over 7° to 45°	from over 45° to 60°	straight up to 45°	with loop up to 45°	straight from 45°to 60°	with loop from 45° to 60°

Modal factor	1	0.8	2	1.4	1	1.4	1.12	1	0.8
TOP 1000	1000	800	2000	1400	1000	1400	1120	1000	800
TOP 2000	2000	1600	4000	2800	2000	2800	2240	2000	1600
TOP 3000	3000	2400	6000	4200	3000	4200	3360	3000	2400
TOP 4000	4000	3200	8000	5600	4000	5600	4480	4000	3200
TOP 5000	5000	4000	10000	7000	5000	7000	5600	5000	4000
TOP 6000	6000	4800	12000	8400	6000	8400	6720	6000	4800
TOP 8000	8000	6400	16000	11200	8000	11200	8960	8000	6400
TOP 10000	10000	8000	20000	14000	10000	14000	11200	10000	8000
TOP 12000	12000	9600	24000	16800	12000	16800	13440	12000	9600

Technical characteristics:

Double layer lifting belts in 100% finest polyester
safety coefficient 7/1 - Combination of colours / capacities to CEN standards
Tapering slots covered with high abrasion resistance synthetic material
Max elongation at working load limit < 5%
Safety labels with 'cannot-lose' manufacturer's name
Instructions on 'Installation' by user
conforms to CEN standards

4-layer lifting belts for special loads constructed according to DIN 61360, carrying capacities of up to 20 tonnes

"TOP CS" Type

	Code: Technical data	TOP CS 2000	TOP CS 4000	TOP CS 6000	TOP CS 8000	TOP CS 10000	TOP CS 12000	TOP CS 16000	TOP CS 20000
	Carrying capacity kg	2000	4000	6000	8000	10000	12000	16000	20000
	b (mm)	30	60	90	120	150	180	240	300
	S (mm)	13.5	13.5	13.5	13.5	13.5	13.5	13.5	13.5
	L1 min. (mm)	1200	1500	1500	2000	2000	2000	2600	3000
	L2 (mm)	350	400	600	800	800	900	1000	1200
	L3 (mm)	30	60	50	70	90	100	130	160
	weight kg 1° meter	0.70	1.4	2	2.8	3.6	4.4	6.6	11.6
	weight kg meter succ.	0.4	0.8	1.2	1.6	2	2.4	3.4	4
	Carrying capacities higher and version with D rings to the extremities available upon request WLL = Working load limit b = belt width S = belt thickness L1= use length L1min = minimum length L2 = slot space - important for hooks of large cranes L3 = width of slot at load point length tolerance ± 3%

Lifting belts for loads with sharp or cutting edges


Code: Technical data	TOP 1000 SX	TOP 2000 SX	TOP 3000 SX	TOP 4000 SX	TOP 5000 SX	TOP 6000 SX	TOP 8000 SX	TOP 10000 SX
Carrying capacity WLL (kg)	1000	2000	3000	4000	5000	6000	8000	10000
b (mm)	40	70	100	130	160	190	250	310
S (mm)	16	16	16	16	17	17	18	18
L1 min. (mm)	1000	1000	1000	1200	1500	1800	2200	2400
L2 (mm)	300	300	300	400	500	600	800	900
L3 (mm)	30	35	50	65	80	70	90	160
weight (kg) 1° m	0.6	1.0	1.4	2.0	2.8	3.6	5.1	7.8
for m	0.8	1.2	1.7	2.4	3.0	3.4	4.7	5.3
S2 - Protection on both sides for TOP Lifting belts
Code: Technical data	TOP 1000 SX	TOP 2000 SX	TOP 3000 SX	TOP 1000 SX	TOP 5000 SX	TOP 6000 SX	TOP 8000 SX	TOP 10000 SX
Carrying capacity WLL (kg)	1000	2000	3000	4000	5000	6000	8000	10000
b (mm)	40	70	100	130	160	190	250	310
S (mm)	18	18	18	18	19	19	20	20
weight (kg) 1° m	0.6	1.3	1.8	2.4	3.3	4.3	6.0	9.1
for m	1.1	1.7	2.4	3.0	3.9	4.6	6.3	7.4

	Terminale-D-Bugel					Gancio-C
	Code Technical data	h (mm)	Ø (mm)	r (mm)		Code Technical data	h (mm)	Ø (mm)	r (mm)
	B 1000-D	120±5	13	90		B 1000-C	65	13	20
	B 2000-D	140±5	16	90		B 2000-C	85	18	25
	B 3000-D	180±5	20	125		B 3000-C	120	22	35
	B 4000-D	220±5	22	150		B 4000-C	150	26	45
	B 5000-D	250±5	26	185		B 5000-C	180	30	50
	B 6000-D	290±5	32	200
	B 8000-D	370±5	36	250
	B10000-D	440±5	40	300

Key for technical data :

WLL = Working load limit (e.g. "straight pulling")
b = belt width - every 30 mm = 1000 kg of carrying capacity
s = thickness of woven fabric
L1 = belt effective length
L1 min. = minimum available length
L2 = slot space - important for hooks of large cranes
L3 = width of slot in on-hook resting point

SX - Protection on one side for TOP Lifting belts